ANR – W1
Price: Please Call
Product Description
Specifications for 4 inch (10.16 CM) round non-reflective pavement markers as tested approved by Washington, California, Nevada, and Oregon State D.O.T. for bituminous application. COMPOSITION: The maker shall be molded of high impact, recycled acrylonitrile butadiene styrene (ABS), conforming to ASTM specification DI 78868. The Manufacture shall certify that the marker does not contain mercury, lead, hexavalent chromium, nor any carcinogen, as defined by 29 CFR 1910.1200. DIMENSIONS: The maker shall be of oval design with a minimum width of 4 inches (10.16 CM) and a minimum height at center of 0.700 inches (1.78 CM) The marker bottem will be designed to allow the adhesive material to flow upwards into the marker cavity, with a venting system to prevent air entrapment. The marker shalle be maunfactured wtih a dulled bottom design for better adhesion. Flatt or non-treated slick bottom markers, without a venting system are unacceptable.
Product Images
Tell a Friend
Email your friend a link to this product.