This page uses Javascript. Your browser either doesn't support Javascript or you have it turned off. To see this page as it is meant to appear please use a Javascript enabled browser. Need help?

www.alpinemarkings.com

EAS-6 Epoxy Adhesive System

Price: Please Call

Product Description

DESCRIPTION 

EAS-6 is a two part epoxy standard set adhesive system designed to meet the requirements of Washington State Department of Highways specification, Section 9-26.2 for bonding of traffic buttons and other lane markers, and Arizona Department of Transportation, Section 706.04. EAS-6 also meets the American Public Works Association Specification 44-2.02 B 4; and State of Oregon Highways Specification 762.06.

OTHER USES: 

Excellent for bonding wood to concrete, steel to concrete, concrete to concrete and asphalt (wheel stops). Customers also report good results when bonding fiberglass or ABS to a variety of surfaces as well as an abrasion resistant coating for metal bottoms of riverboats.

MIX RATIO: 

One to One, by weight of volume

CONSISTENCY: 

Soft, Buttery

COLOR: 

Part A: White, Part B: Black, Mixed: Gray.

WORK OR POT LIFE: 

Approximately 7-10 minutes at 70 degrees F. (Based on a one pound batch).

PHYSICAL PROPERTIES: 

(typical)
Compressive strength: (2-inch cubes, 3 day cure) > 3000 psi
Dry Bond Test: (Arizona 706.05) (7 days) PASSED
Wet Bond Test: (Arizona 706.05) (24 hours) PASSED
Wet Bond Test: (Arizona 706.05) (72 hours) PASSED

VISCOSITY RANGE: 

100,000-300,000 cps
Helipath TD @ 77 F, For both Part A and Part B

CURE CHARACTERISTICS* (approximate): TYPE 1 

Firm Set Time @ 70 F 2 hours
Firm Set Time @ 50 F 4 hours
Hard Set Time @ 70 F 4 hours
Full Cure @ 70 F 24 hours
* Based on 40 Mil film.

RECOMMENDED APPLICATION TEMPERATURE RANGE: 

50 F to 105 F.

RECOMMENDED BOND TEMPERATURE RANGE: 

-20 F to 160 F.

CLEAN UP: 

Uncured epoxy mixes can be dissolved with MEK, Toluene or Xylene. Cured epoxy is very difficult to remove, but extended soaking (days) in MEK will soften most cured epoxy. Keep material and solvent off skin with protective gloves.

SHELF LIFE: 

Guaranteed one year when stored in sealed containers at temperatures between 50-90 F. Part A subject to crystallization when stored in intermittent cool temperatures for prolonged periods.

SHIPPING WEIGHTS: 

Applies to both Part A and Part B.
10 lb. pails approx. 1 gallon
50 lb. pails approx. 5 gallons
500 lb. drums approx. 50 gallons

COVERAGE: 

100 to 200 buttons/gallon (4″ round)
100 buttons/gallon (4″ square)

Product Images



Tell a Friend

Email your friend a link to this product.
  • This field is for validation purposes and should be left unchanged.